Fix Sagging Couch With Plywood

A sagging couch can be a major eyesore, but it doesn't have to be a permanent fixture in your living room. With a little bit of effort and some basic tools, you can fix a sagging couch with plywood and restore it to its former glory.

Materials:

1/2-inch or 3/4-inch plywood
Wood screws
Drill
Screwdriver
Measuring tape
Pencil

Instructions:

Measure and Cut the Plywood: Measure the length and width of the sagging area of the couch. Cut a piece of plywood to these dimensions using a circular saw or a jigsaw.
Secure the Plywood: Place the plywood over the sagging area of the couch. Secure it to the couch frame with wood screws. Be sure to countersink the screws so that they are flush with the surface of the plywood.
Cover the Plywood: Once the plywood is secured, you can cover it with fabric or upholstery to match the rest of the couch. This will help to hide the plywood and give the couch a finished look.

Here are some additional tips for fixing a sagging couch with plywood:

Use a thicker piece of plywood (3/4-inch) for a more permanent solution.
Add a layer of batting or foam under the plywood for added comfort.
If the sagging is caused by broken springs, you may need to replace the springs before adding the plywood.
If the couch is sagging in multiple areas, you may need to reinforce the entire frame with plywood.

Fixing a sagging couch with plywood is a relatively simple and inexpensive project that can be completed in a few hours. By following these steps, you can restore your couch to its former glory and enjoy it for many years to come.