How To Repair Sagging Couch Springs

Sagging couch springs can be a major annoyance, making your couch uncomfortable to sit on and even causing back pain. The good news is that repairing sagging couch springs is a relatively easy and inexpensive DIY project that can be completed in a few hours.

Tools and Materials You'll Need:

Phillips head screwdriver
Flat head screwdriver
Hammer
Pliers
New couch springs
Spring clips
Upholstery fabric
Upholstery thread

Step-by-Step Instructions:

1. Remove the Couch Fabric

Start by removing the couch fabric. This is usually done by unzipping or unscrewing the fabric from the frame. Once the fabric is removed, you'll be able to see the springs.

2. Identify the Sagging Springs

Once you can see the springs, it's time to identify the ones that are sagging. Sagging springs will be noticeably lower than the other springs and may even be touching the couch frame.

3. Remove the Sagging Springs

Use a pliers to remove the spring clips from the sagging springs. Once the clips are removed, you can pull the springs out of the couch frame.

4. Replace the Sagging Springs

Take your new couch springs and insert them into the couch frame. Make sure that the springs are properly aligned and that the coils are facing the right direction.

5. Secure the Springs

Once the springs are in place, it's time to secure them. Use spring clips to attach the springs to the couch frame. Make sure that the clips are tight and that the springs are securely in place.

6. Reattach the Couch Fabric

Once the springs are secured, it's time to reattach the couch fabric. Simply zip or screw the fabric back into place.

7. Enjoy Your Repaired Couch

Your couch is now repaired and ready to be used again. Enjoy sitting on your newly comfortable couch!

Tips for Repairing Sagging Couch Springs:

If you're not sure how to identify sagging springs, you can use a level to check the height of the springs. Sagging springs will be lower than the other springs.
When replacing sagging springs, it's important to use springs that are the same size and type as the original springs.
Make sure that the springs are properly aligned before securing them in place.
If you're having trouble removing or installing the spring clips, you can use a hammer to gently tap them into place.